PE series jaw crusher

PE series jaw crusher can reach the crushing ratio of 4-6 and the shape of final product is even. Jaw crushers are widely applied to crush high hardness, mid hardness and soft rocks and ores such as slags, construction materials, marble, etc. The pressure resistance strength is under 200Mpa, that is, suitable for primary crush. Jaw Crusher can be used in mining, metallurgical industry, construction, road and railway building, conversancy, chemistry, etc.

Features Of Jaw Crusher:

1. The crushing cavit is deep and without dead zone, which can increase the feeding capacity and capacity;
2. It has a big crushing ratio and even grain shape.
3. The gasket type inlet size makes flexible adjustment posible, and it’s reliable, conveinent, and with a big adjustment range,which can greatly enhance the flexibility of the equipments.
4. It has a simple structure, and is quite stable and low in operation cost.
5. The equipment is energy saving: 15%-30% energy can be saved for each single plate, more than twice energy will be saved for the whole system;

Technical Parameter Of Jaw Crusher
Mm to inch conversion: 25.4millimeters=1 inch

Model	Max. Feeding Size (mm)	Discharge Size (mm)	Capacity (t/h)	Motor Power (kW)	Overall Dimensions (mm)	Weight (t)
PE400×600	350	40-100	15-60	30	1700×1732×1653	6.5
PE500×750	425	50-100	50-100	55	2035×1921×2000	10.3
PE600×900	480	65-160	60-130	75	2290×2206×2370	16.5
PE750×1060	630	80-140	80-180	110	2620×2302×3110	29
PE900×1200	750	95-165	140-260	110	3789×2826×3025	54.5
PE1000×1200	850	195-265	315-550	110	3335×3182×3025	57
PE1200×1500	1020	150-300	400-800	160-220	4200×3750×3820	100.9

Note: Any change of jaw crusher technical data shall not be advised additionally.